IPTV guide times are wrong: finding the offset
If every programme in the guide is off by the same whole number of hours, the cause is a time zone: either your device is set to the wrong one, or the guide gives its times without saying which zone they are in and the player reads them as another. If it is exactly one hour and started around a clock change, it is daylight saving time. If only some channels are off, or by a few minutes, the guide’s data for those channels is wrong at the source, and only the provider can correct it. Start by measuring the gap on one programme you can check.
Measure the gap
Pick a programme whose real start you know: the news on the hour, or a channel showing a clock. Put both times in:
Then check two or three other channels. The pattern matters more than the number:
| Pattern | Cause | Whose side |
|---|---|---|
| Every channel off by the same whole hours | The device’s time zone, or the guide’s | Check the device first, then the provider |
| Every channel off by exactly one hour, since a clock change | Daylight saving on the device or in the guide | Device first, then provider |
| Some channels right, some off by hours | Those channels’ guide data, or “+1” channels matched to the original’s schedule | Provider |
| Off by a few minutes, different on each programme | The channel running over its schedule | Nobody: it is the broadcast |
| The right programme at the right time, on the wrong channel | A wrong guide id on the channel | Provider, see what an EPG is |
How guide times work
A guide file gives each programme a start and an end, normally with the time zone it is written in, such as 20260313200000 +0100 for 20:00 in a zone one hour ahead of UTC. A player converts that to your device’s local time, so the same guide shows 20:00 in Paris and 19:00 in London, both correct.
Two things break it:
- Your device’s clock or zone is wrong. The player converts correctly, to the wrong local time. Every channel shifts by the same amount, and so does everything else on the device that shows a time.
- The guide leaves the zone out, or writes the wrong one. The file says
200000and nothing more, or says+0000for times that are really local. The player has to assume a zone, and if the assumption differs from what the provider meant, every programme shifts by the difference.
Daylight saving adds a twist: a guide that writes a fixed offset all year, such as +0100, is one hour off for half the year in a country that moves its clocks.
Fix it on the device first
The device is the cheaper check, and the more common cause on TV boxes that were set up quickly or travelled.
- Android phone or tablet: Settings, then System, then Date and time. Turn on automatic date and time and automatic time zone. If the zone is still wrong, turn automatic time zone off and pick your city.
- Google TV and Android TV: Settings, then System, then Date and time. Set the time zone to your city rather than a GMT offset, so daylight saving is applied when it changes.
- Fire TV: Settings, then Preferences, then Time Zone, and pick your city.
Then reopen the guide. Some players convert the times once, when they read the guide, and need the guide reloaded before the new zone shows.
When it is the guide
If the device’s zone is right, your phone’s clock agrees with the TV, and the guide is still off by whole hours on every channel, the guide file states its times in a zone that does not match what it means. Tell the provider exactly that, with numbers: “Your guide lists the 20:00 news at 21:00 for every channel, in [your city]; it looks like the times are written as UTC.” A provider can fix the zone in its file once, for every customer.
Two cases that look like a zone problem but are not:
- “+1” channels. A channel that shows the same schedule an hour later often borrows the original channel’s guide. Its programmes appear an hour early. The provider has to give it its own guide entries.
- Regional versions. A channel with several regional feeds may share one schedule, which is right for one region and off for the others.
What a wrong guide breaks
A wrong guide is more than cosmetic, because the guide’s times drive other features:
- Recordings from the guide start and stop at the guide’s times. An hour off means you record the end of the previous programme and miss the end of yours.
- Recording to the end of the programme stops at the guide’s end time.
- Watching from the start asks for the programme from the guide’s start time. A wrong start lands you in the wrong place.
- Reminders fire at the guide’s time.
Catch-up and the guide’s clock
Watching a programme from its start uses the guide’s start time to ask the provider’s archive for the right moment. With the zone fixed on the device, catch-up lands at the start; with a guide that is off by an hour, it lands an hour into the previous programme. If catch-up starts in the wrong place on every channel, the guide’s times are the first suspect, not the archive.
Questions that come up
Why is the guide right on my phone and wrong on my TV? The two devices have different time zones. The guide file is the same; the conversion differs. Fix the TV’s zone.
Why did it go wrong overnight? A clock change, or the provider changed its guide. If it happened on the night the clocks moved, it is daylight saving, on the device or in a guide that writes a fixed offset.
Can I use another guide with the right times? Yes, if its channel ids match your playlist’s. A guide built for another lineup matches few channels; see what an EPG is and why the guide is empty.
Is it my player? If two players on the same device show the same wrong times, it is the device or the guide. If one is right and the other wrong, the players read zone-less times differently, and the guide is missing its zones.
The guide is right, but the clock on the TV box is wrong. Then the device’s time, not only its zone, is off, and the “now” line in the guide sits in the wrong place. Turn on automatic date and time; a box that cannot reach a time server keeps drifting, and a box with a wrong date also fails secure connections, as E-NET-TLS describes.
Adless reads the guide your provider publishes for your own playlist. It ships no channels and no guide data of its own.
Read next
- What an EPG is, and why the TV guide is empty The EPG is the programme schedule your player shows beside each channel. Where it comes from, the five reasons it stays empty, and how to tell them apart.
- IPTV channel won't load: the causes in order A channel that will not start fails in one of six places, from your connection to the provider's server to the device's decoder. How to check them in order, and what each error means.
- How much data IPTV uses, per hour and per month IPTV uses about 0.9 GB an hour in SD, 2.7 GB in 1080p and 9 GB in 4K, but the real figure is your channel's bitrate. How to read it, a calculator, and what else uses data besides the picture.